 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : option colourcode in MM2 request
| Author | Message | ||||
| Volhout Guru  Joined: 05/03/2018 Location: NetherlandsPosts: 5091 |
This one is probably for Geoff. I tried option colourcode on, on the MX170 (5.05.03) using both Putty and TeraTerm. Both show exactly the same colours. That is why I think these colours are determined by MMBasic. The colours are usable on a white paper, but on black background they are not. Is it possible in the next release of micromite basic (MM2) to a/ give the option for 2 sets of colours, one for black background, one for white background ? i.e. option colourcode 1 and option colourcode 2. b/ Align the colours in the current colourcode with the colours in MMedit ? (for white background: comment = grey, commands = dark blue, constants = red). I am not sure if this has been requested before. If so, please ignore the request. Volhout PicomiteVGA PETSCII ROBOTS |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 7938 |
I compromised on using a grey background in Tera Term. :) It works quite well for me. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
| robert.rozee Guru Joined: 31/12/2012 Location: New ZealandPosts: 2442 |
see here for discussion and workarounds in teraterm: https://www.thebackshed.com/forum/ViewTopic.php?TID=10445&PID=118813#118813 cheers, rob :-) |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
