 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Fur unsere deutschsprachigen freunde
Page 1 of 2   |
|||||
| Author | Message | ||||
| Volhout Guru  Joined: 05/03/2018 Location: NetherlandsPosts: 5089 |
AEON picomite introduction PicomiteVGA PETSCII ROBOTS |
||||
Martin H. Guru Joined: 04/06/2022 Location: GermanyPosts: 1233 |
ist natürlich schon bekannt  Edited 2022-11-08 21:15 by Martin H. 'no comment |
||||
Hans Senior Member  Joined: 18/10/2022 Location: CanadaPosts: 116 |
Vielen Dank Harm. Es war ein sehr schönes Video.  Hans ...  Edited 2022-11-09 05:11 by Hans |
||||
| Frank N. Furter Guru Joined: 28/05/2012 Location: GermanyPosts: 949 |
Vielen Dank!!! Das kannte ich noch nicht! Frank |
||||
| Martin H. Guru Joined: 04/06/2022 Location: GermanyPosts: 1233 |
Gut erklärt, für uns ist es nun nicht etwas wirklich neues gewesen, aber um den Bekanntheitsgrad von PicoMite zu erhöhen sicher eine gute Wahl. Ich bin über ein Video vom "ExplainingComputers" Kanal auf PicoMite und MM Basic aufmerksam geworden. 'no comment |
||||
| Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 5089 |
Maybe continue in English.... ?? Volhout PicomiteVGA PETSCII ROBOTS |
||||
| Amnesie Guru Joined: 30/06/2020 Location: GermanyPosts: 671 |
Hallo, das Video ist von mir. Ich habe noch lange nicht die große Erfahrung wie einige hier im Forum, was MMBASIC angeht, aber ich habe das Video genau deswegen gemacht, um die Bekanntheit etwas zu steigern :) English: The videos was taken by me, since I have not the hughe experience like others here, when it comes to MMBASIC, I just wanted to spread this great project and help to make it better known in germany :) - Daniel Edited 2022-11-09 22:31 by Amnesie |
||||
twofingers Guru Joined: 02/06/2014 Location: GermanyPosts: 1593 |
@Daniel Well done! Schönes Video, sehr aufgeräumt. I like it!And the young guy is your son? EDIT: Thanks also to Harm for the link. Best regards Michael Edited 2022-11-09 23:25 by twofingers causality ≠correlation ≠coincidence |
||||
| Amnesie Guru Joined: 30/06/2020 Location: GermanyPosts: 671 |
 Das bin ich und ich drücke hier vermutlich den Altersduchschnitt nach unten! English: That's me and I'm probably pushing the average age down here! - Daniel |
||||
| Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 5089 |
Hi Amnesie, You should post a little more to become GURU. Currently you are SENIOR MEMBER which does not lower the age.... PicomiteVGA PETSCII ROBOTS |
||||
| twofingers Guru Joined: 02/06/2014 Location: GermanyPosts: 1593 |
I agree. I'm sure about that.  causality ≠correlation ≠coincidence |
||||
| Hans Senior Member Joined: 18/10/2022 Location: CanadaPosts: 116 |
That video started me on the PICO and MMBasic. I have been a long time subscriber to "Explaining Computers". When I watched the video I said "I have to try that." Slowly building a version of the PicoMite Mini from Mick's schematics. I have the VGA, RTC and SDCard working on a breadboard. Just waiting for a level shifter to attach a keyboard. There are soooooooo many resources available on this forum! I was born in Buchholtz Germany, maybe I will have a chance to see it again, you never know. Hans ... |
||||
phil99 Guru Joined: 11/02/2018 Location: AustraliaPosts: 2640 |
" Just waiting for a level shifter to attach a keyboard." It does no harm to try your keyboard(s) on 3V3. Out of four I tried only one required 5V, and that one did not have internal pullup resistors so external 3k3 pullups to 3V3 was all that was required to connect it to a Pico. |
||||
| Hans Senior Member Joined: 18/10/2022 Location: CanadaPosts: 116 |
Thanks Phil I will give that a try. Hans ... |
||||
Grogster Admin Group  Joined: 31/12/2012 Location: New ZealandPosts: 9610 |
Danke. (thank you) As I am still trying to learn German in the background of everything else going on, I was able to follow a little of what was being said, but only a little! My admin position on this is that as it is an English language forum, please at least post translations so people can follow along. I have no issue at all with any member posting anything they like in their native tongue, just so long as there is a translation below it so others can understand. Smoke makes things work. When the smoke gets out, it stops! |
||||
| Frank N. Furter Guru Joined: 28/05/2012 Location: GermanyPosts: 949 |
@David: This is a really nice video!  The only thing I didn't like was the note with the GOTO's. They are really no longer up to date and are now (thanks to the SUB's and DO-LOOP's) no longer needed! Where in Germany do you live? Frank |
||||
| Martin H. Guru Joined: 04/06/2022 Location: GermanyPosts: 1233 |
I totaly agree with that. Sorry for not trancelating my previous Post.  But @Daniel after a few weeks/months of experience... Are you planning a 2nd, extended part of the video? something like a PicoMite for beginners series 'no comment |
||||
| Amnesie Guru Joined: 30/06/2020 Location: GermanyPosts: 671 |
@ Frank I'm from Rostock. You are right with the GOTOs, as already said, I am a beginner when it comes to MMBASIC, which takes me to Martins post; I really should do some follow up video(s), it would be perfect to get used to the BASIC dialect at the same time. Win win situation. :) Since I am really "into" guitar effects and amplifier stuff too, I am really busy with that. But in the future there will be more BASIC related stuff. I am still facinated what you guys are capable of. Much to learn for me  My strength is more in PCB development and audio related circuits + a bit of C programming. As I said in my video on YouTube, I thought BASIC would be dead and I had only read about it as an "ancient" language. But it is so much fun having a stand alone "PC" / Interpreter which is capable of so many things - especially at this price point! Greetings Daniel Edited 2022-11-10 20:19 by Amnesie |
||||
| Frank N. Furter Guru Joined: 28/05/2012 Location: GermanyPosts: 949 |
BASIC with line numbers is a horror! Fortunately, this is no longer necessary with a "modern" BASIC. Since 1991 there is QBASIC which does not need numbers anymore and allows structured programming. GFA BASIC was even ready by 1986. You should have a look at Great Cow Basic You can find the latest version HERE. It is free and you can program PICs and AVRs with it. Frank |
||||
| twofingers Guru Joined: 02/06/2014 Location: GermanyPosts: 1593 |
I agree. I use line numbers for debugging and sometimes to circumvent a firmware bug. Regards Michael EDIT: But I don't want to start a ideological battle. Edited 2022-11-11 02:09 by twofingers causality ≠correlation ≠coincidence |
||||
| Page 1 of 2 |
|||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
