Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 07:08 02 Aug 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : MMBasic in Make: Magazine

Author Message
NPHighview

Senior Member

Joined: 02/09/2020
Location: United States
Posts: 203
Posted: 01:11am 28 Oct 2023
Copy link to clipboard 
Print this post

Folks - I mentioned a while ago that the PicoScope project I was working on had piqued the interest of the editors of Make: Magazine. If you have a subscription, you'll see my article on p. 58. On p. 64, you'll see my list of acknowledgments:
  Quote  * MMBasic (implemented for the RP2040 as PicoMite firmware) by Peter Mather and Geoff Graham
* Many ideas for this program were shared on The Back Shed Forum
* Sampling, Test Signal, Triggering, and Framebuffers from stanleyella
* Math routines and Memory Copy from Peter Mather
* Luis Mateo (my neighbor) for collaboration on the enclosure design.


Live in the Future. It's Just Starting Now!
 
Volhout
Guru

Joined: 05/03/2018
Location: Netherlands
Posts: 5091
Posted: 07:01am 28 Oct 2023
Copy link to clipboard 
Print this post

Nice!
This article may bring some new folk to the forum.
Good promotion.

Volhout
PicomiteVGA PETSCII ROBOTS
 
JohnS
Guru

Joined: 18/11/2011
Location: United Kingdom
Posts: 4044
Posted: 07:12am 28 Oct 2023
Copy link to clipboard 
Print this post

Well done!

John
 
karlelch

Senior Member

Joined: 30/10/2014
Location: Germany
Posts: 237
Posted: 10:52am 28 Oct 2023
Copy link to clipboard 
Print this post

Nice!

Best
Thomas
 
stanleyella

Guru

Joined: 25/06/2022
Location: United Kingdom
Posts: 2567
Posted: 01:26pm 28 Oct 2023
Copy link to clipboard 
Print this post

That's safe. I hope you learnt as much as I did using adc and this scope application spin off. I like waveshare rpi board with 0.96 lcd, I wouldn't have bought one had it not been mentioned on this forum. neat.
I discovered mmbasic rpipico on "Explaining computers.com" by chance. I was happy with gcbasic for arduino uno/nano but who's heard of it?
mmbasic rpipico is imho great hobbyist system and want to let others know and magazine articles do that. nice.
my claim to fame,ha. https://gcbasic.sourceforge.io/Typesetter/index.php/Building-a-Robot-using-a-VL53L0X-laser-range-finder
Edited 2023-10-29 00:51 by stanleyella
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025