Menu
JAQForum Ver 19.10.27

Forum Index : Microcontroller and PC projects : I've been busy

Posted: 11:39pm
02 May 2025
Copy link to clipboard
PeteCotton
Guru


I've not been very active on the forum for the last few weeks, as I've been tied up with mounting the harrier on beams (so pub patrons can sit underneath it). It was a lot of fun.

My next step is to mount LEDs underneath and inside it (and potentially a sound system and smoke machine/fans) and control them with a PLC to produce a more dynamic experience.

Here I am to provide some sort of scale.



And with our first patrons underneath.





Video of the final lift here:
https://1drv.ms/v/s!AnkZn9N9Pt1fyaYYSSCLAb-HZguLlQ?e=Wj93SF

Now, to enjoy a nice pint of Guinness under the shade of it's wings!
 
Posted: 04:20am
03 May 2025
Copy link to clipboard
SimpleSafeName
Guru


Likewise. I just returned from helping setup our controls on a drill rig for a UK group of scientists doing some exploration on the L/B Robert.


 
Posted: 07:30am
03 May 2025
Copy link to clipboard
WhiteWizzard
Guru

Nice work there with the harrier!

If only you had edited out the crane and straps in the video - it would have then looked like a real VTOL onto the beams!!
 
Posted: 08:05am
03 May 2025
Copy link to clipboard
Mixtel90
Guru


Those are both really cool. :)

Great video, Pete!
Edited 2025-05-03 18:06 by Mixtel90
 
Posted: 10:25am
03 May 2025
Copy link to clipboard
PhenixRising
Guru

Heck, I wouldn't be able to resist sticking some speakers in there with sound FX.

"Automatic vertical take off has been initiated, system checks underway"

[Turbofan spinning-up sound effect]  
 
Posted: 01:45pm
03 May 2025
Copy link to clipboard
lizby
Guru

Way cool
 
Posted: 03:07pm
03 May 2025
Copy link to clipboard
Mixtel90
Guru


I'm sure those steerable exhaust vents could produce a welcome, cooling breeze for the tables below. :)
 
Posted: 05:36pm
03 May 2025
Copy link to clipboard
PeteCotton
Guru


Thank you all!

  SimpleSafeName said  Likewise. I just returned from helping setup our controls on a drill rig for a UK group of scientists doing some exploration on the L/B Robert

Very cool!

  WhiteWizzard said  If only you had edited out the crane and straps in the video - it would have then looked like a real VTOL onto the beams!!


I like this idea! Maybe a task for somebody good at video editing.

  PhenixRising said  Heck, I wouldn't be able to resist sticking some speakers in there with sound FX.

I know! We have some great ideas. We're going to experiment with it over the summer.

  Mixtel90 said  I'm sure those steerable exhaust vents could produce a welcome, cooling breeze for the tables below. :)

We were toying with the idea of a smoke machine with fans that would blow smoke down, linked with red LED's to give the impression of hot blast air (yes, I know technically the front two steerable exhaust are cool bypass air and only the rear thrusters are hot - but that might require some explaining). But I think ultimately we might forego the smoke machine.

We were thinking of putting misting lines under the wings to spray cool water over the punters on the really hot days.
Edited 2025-05-04 03:37 by PeteCotton
 


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025