Guru
Joined: 21/06/2018
Location: AustraliaPosts: 1190
| Posted: 03:32pm 11 May 2024 |
Poida showed what he did to the EGS002 card to stop it blowing mosfets here
I would not give up yet without first trying the EGS002 Mods.
There is another entry by "Tinker" now Murphy Friend on how to Mod the card - I can't advise if they are the same or if one is better than the other - I have never modded a card.
Tinker mods are here
So hopefully someone else can advise you of the best method to make your EGS002 FET friendly. Whilst your breadboard may not be the neatest, I do not believe it is what is stopping you from generating AC instead of just dead FETs.