Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 11:42 21 Nov 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : WTB Printed Panels

Author Message
toml_12953
Guru

Joined: 13/02/2015
Location: United States
Posts: 487
Posted: 12:21pm 14 Aug 2022
Copy link to clipboard 
Print this post

Does anyone sell printed front/rear panels for the Gen 2 CMM?
If so where can I get them? I'm looking for two sets if possible.
I'm in the USA but don't care if it costs a bit to have them shipped.

Thanks for your time!
 
twofingers

Guru

Joined: 02/06/2014
Location: Germany
Posts: 1682
Posted: 01:26pm 14 Aug 2022
Copy link to clipboard 
Print this post

Hi,
I guess something like this will not help?

There should be more (DIY) in July 2020 (2020-07-28_143342_CMM2-case.zip).
Regards
Michael
causality ≠ correlation ≠ coincidence
 
mclout999

Guru

Joined: 05/07/2020
Location: United States
Posts: 492
Posted: 01:41pm 14 Aug 2022
Copy link to clipboard 
Print this post

https://geoffg.net/maximite.html The main project list some vendors, but for your convenience from that page.


Rictech in New Zealand supply the design illustrated above: https://www.rictech.nz/micromite-products

Some suppliers have created their own designs which offer some additional features but are still compatible with the Generation 2 design and runs the same firmware.  These are:

CircuitGizmos in the USA https://circuitgizmos.com/RetroMax-CGs-Color-Maximite-2-p241231864

PS Labs in Poland
https://sklep.pslabs.pl/Maximite-c91/s_lang/en

Are there any more now!
They call me Shai-Hulud (The maker)
 
toml_12953
Guru

Joined: 13/02/2015
Location: United States
Posts: 487
Posted: 04:48am 16 Aug 2022
Copy link to clipboard 
Print this post

  mclout999 said  https://geoffg.net/maximite.html The main project list some vendors, but for your convenience from that page.


Rictech in New Zealand supply the design illustrated above: https://www.rictech.nz/micromite-products

Some suppliers have created their own designs which offer some additional features but are still compatible with the Generation 2 design and runs the same firmware.  These are:

CircuitGizmos in the USA https://circuitgizmos.com/RetroMax-CGs-Color-Maximite-2-p241231864

PS Labs in Poland
https://sklep.pslabs.pl/Maximite-c91/s_lang/en

Are there any more now!


I just ordered two sets from Rictech. Thanks for the tip!
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025