 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Web UI for uMite projects
| Author | Message | ||||
| MikeO Senior Member  Joined: 11/09/2011 Location: AustraliaPosts: 275 |
I have been playing recently with Annex RDS to see how practical it would be to make a wifi User Interface for use with Micromites. My test candidate was a Camera Trigger I built several years ago, original post here. It turn out to be an easy project and would make an effective interface for any micromite hardware without the complications of an LCD. Information transfer is via a simple fast serial link of several delimited data strings. I have put Photos and code on my web site here. Mike Codenquilts |
||||
| lizby Guru  Joined: 17/05/2016 Location: United StatesPosts: 3472 |
Useful. Annex is a powerful tool for adding a Wifi interface. I like your Parse routine. PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
dMajo Newbie  Joined: 18/05/2020 Location: ItalyPosts: 29 |
Have a look also at these modules: https://tibbo.com/store/boards/em2001.html https://tibbo.com/store/modules/em2000.html https://tibbo.com/store/modules/em510.html https://tibbo.com/store/modules/em510.html It's several years now that I use these modules for web-gui and remote-serial. I also upgrade firmware of PICs and Parallax Propeller ICs with them. Recently I used them also with micromites on the console connection. ALLdataEE.com EDU Promos |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
