 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Armmite F4: SSD1963 adapter
  Page 3 of 3 |
|||||
| Author | Message | ||||
| ceptimus Senior Member  Joined: 05/07/2019 Location: United KingdomPosts: 130 |
For non commercial stuff you can use PayPal friends and family - you'll find it on their site. The charges are zero if you're not changing currencies. I guess they still might charge for currency conversion - I've not tried it for that. |
||||
| paceman Guru  Joined: 07/10/2011 Location: AustraliaPosts: 1329 |
Thought I saw something about them changing that too six months or so ago but I'll check it out for future reference. All transferred anyway Brian - thanks a lot. Greg |
||||
| BrianP Senior Member Joined: 30/03/2017 Location: AustraliaPosts: 292 |
One of the good things I like about PayPal is the 180days dispute resolution window. I haven't had to use it, so don't know how "good" it is... B |
||||
| stepper Newbie  Joined: 15/12/2016 Location: United KingdomPosts: 6 |
Brian (chopperp), I sent you a pm a few days ago about payment for my board - did you get it? Trevor (stepper) |
||||
Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1088 |
Hi Trevor I've been looking out for PM's but nothing from you. Just noticed this post actually. I assume you have the board. Will advise tomorrow AEST about payment. You could check how much PP costs for family & friends if you like. Brian ChopperP |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1088 |
HELP!! I receive a 7" panel today, wired up an adapter board & loaded the firmware from the first post of this thread into a new board. I have a separate 5V supply to the panel Option List still comes up with LCDPANEL ILI9341_16 etc . Is this correct or should another option be used? I did try OPTION RESET but the the connection terminated & nothing changed. I do get vertical lines on most of the display & backlight sort of works inversely. Brian Edit Found OPTION LCDPANEL DISABLE which worked as did OPTION LCDPANEL SSD1963_7_16, LANDSCAPE OPTION TOUCH PB12, PC5 but still nothing happening. Edit 2 Did another reset. GUI TEST LCDPANEL works Progress at last. All good. Thanks to all. Answers in the threads if one reads them correctly & thoroughly B Edited 2019-08-26 22:00 by Chopperp ChopperP |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9995 |
This is a feature  Basically what happened is that before you did the disable you sent the ILI9341 initialisation codes to the SSD1963. This confuses the be-jabbers out of it and stops it working. Unfortunately the PCB I/F doesn't have a display reset line I can waggle in firmware only the main CPU reset. So until you do a physical reset the display doesn't respond. |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1088 |
Ok, understood. Changed to RLANDSCAPE. Working fine. Now to find a use for it  BTW, what's the latest firmware version for the F4? Thanks Peter for your work here. Brian. ChopperP |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 9995 |
My last post here |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1088 |
Thanks Peter ChopperP |
||||
| Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1088 |
Hi Trevor I got your snail mail envelope the other day thank you very much. (I did send you a PM) Brian ChopperP |
||||
| Page 3 of 3 |
|||||
 Print this page |
